• +86 536 2326298
  • Email

ABOUT MI DUN

Contact Details

  • PHONE: +86 536 2326298
  • FAX: +86 536 2326298
  • EMAIL:

Executive Standard

The type and application of protective footwear

The type and application of protective footwear

 

According to the protective performance of the shoes for the classification of labor insurance shoes, mainly anti-static shoes and conductive shoes, insulated shoes, anti-smashing shoes, anti-acid shoes, anti-oil shoes, anti-skid shoes, anti-puncture shoes, cold shoes, waterproof shoes And other special shoes.Safety shoes,Work shoes

1、Insulation shoes (boots)

Insulation shoes can only be used as auxiliary safety labor protection products, and the mechanical properties must be good. For the protection of electrical workers to prevent electric shock accidents within a certain voltage range.

2、anti-static shoes and conductive shoes

In order to ensure the elimination of the effects of static electricity on the human body, the bottom of the shoes must not be covered with insulating impurities, and high insulating socks should not be worn to prevent static electricity from causing accidents. Conductive shoes can only be used in places where the risk of electric shock is low.

3、 anti-oil shoes (boots)

Used for oil or splashed areas.

4、anti-acid shoes (boots)

Used in the workplace where there are acid and alkali and other corrosive liquids, such as acid-base splash. The bottom and the skin of acid and alkali resistant shoes (boots) must have good acid and alkali resistance and permeation resistance.

5、 anti-smashing shoes

The front of the shoe is made of impact-resistant material. Its main function is to prevent falling objects from injuring the foot.

6、steel shoes

The main function is anti-scald, thorn cutting, can have a certain static pressure and resistance to a certain temperature, non-flammable.

7、 cold-proof shoes (boots)

Cold-proof shoes (boots) without heat source and heat source type.The former are heat-powered shoes (boots), and usually fuel (such as oil and carbon) is used as heat source, and the latter are cotton shoes, fur shoes (boots) and the like. It is used for protecting the feet of cryogenic workers from frostbite.

8、 anti-puncture shoes

Prevents being stabbed by various hard objects for the protection of the plantar.

9、 waterproof shoes (boots)

Variety of industrial and mining waterproof shoes, salt beach shoes, aquatic products boots, etc., these types of boots require wear, non-slip, anti-piercing, etc., aquatic products, salt beach boots rubber also salt corrosion resistance. For workplaces with water or splashing water.



TAG:   Safety shoes